Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Northridge
Gate parts and welding in Northridge usually means one of three things: a hinge that finally let go, a post that’s leaning, or a rail that’s cracked through. We handle all three, plus the custom welding jobs other shops turn down. If you live in the 91324, 91325, or 91327 zip codes, our crews know your streets, your block walls, and the particular way gates fail on this side of the Valley. Call (350) 248-1180 and a live person answers, day or night.
What makes Northridge different? The 1994 earthquake. We’ll get into that below, but the short version is this: a surprising number of gate problems in this neighborhood trace back to post-quake concrete work that was never quite right. That’s not something a parts catalog can fix. It takes a welder who understands footings, not just brackets.
Why Ironworks Gate Co. Is Northridge’s Preferred Gate Parts & Welding Company
We’ve been at this for over 42 years, since 1984, and we plan on being here another forty. Victor Salinas leads our team, and he runs it the way he’d want a crew working on his own mother’s house: background-checked, uniformed, and careful about every cut and weld. Northridge homeowners call us because we don’t rush, we don’t upsell, and we put our guarantee in writing. Every job carries the 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
Our Gate Parts & Welding team knows the ranch-style homes built through the 50s, 60s, and 70s that dominate Northridge. These properties have block-wall perimeter fencing and wide driveways built for heavy swing gates and cantilever slide gates. The ironwork from that era is solid but old. Hinges wear out. Welds fatigue. Posts shift. And when the post-quake rebuild added a second wave of gates in the mid-90s, it created a whole other repair timeline that’s now coming due. We understand both generations of hardware because we’ve fixed both, hundreds of times, right here in Northridge.
One more thing: when you call, you talk to a person. Not a recording. That matters at 11 p.m. when your gate won’t close and your driveway is wide open to Tampa Avenue.
Our Gate Parts & Welding Services in Northridge
Hinge Replacement
Hinge replacement in Northridge runs $180-$420 per hinge depending on gate weight and whether we’re working with barrel hinges, weld-on hinges, or adjustable gate hinges. On older ranch-style homes off Corbin Avenue and Reseda Boulevard, we often find the original hinges were undersized for the gate they’re carrying. A 16-foot iron gate needs serious hardware. We cut out the old hinge, weld in the new one, and set the gate so it swings true. If the post itself has moved, we’ll tell you before we weld anything, because a new hinge on a tilted post is money wasted.
Post Replacement
Post replacement is where Northridge’s earthquake history really shows up. A typical post replacement here runs $600-$1,400 depending on depth, concrete volume, and whether the old footing needs to be jackhammered out. We regularly pull posts that were re-poured in the 1994-1998 rebuild wave and find the concrete pad was never level. The gate has been fighting that tilt for twenty-five years. We re-pour the footing, plumb it properly, and re-hang the gate. The difference is immediate, and the repair actually holds.
Rail Repair
Rail repair usually involves a cracked weld, a rusted-through bottom rail, or a top rail that’s bowed from years of Santa Ana winds pushing against a wide swing gate. Expect $220-$650 depending on the extent of the crack and whether we’re splicing new steel in or grinding, welding, and reinforcing the existing rail. Northridge gates built in the 70s often have real thickness to the steel, which makes them excellent candidates for repair rather than replacement. We’d rather weld than upsell you a new gate.
Custom Welding
Custom welding covers everything from fabricating a matching picket to rebuilding a gate frame that’s racked out of square. Rates run $95-$150 per hour plus materials, and most Northridge jobs finish in a single visit. We’ve fabricated livestock latches for the larger properties along the northern edge of Northridge, reinforced sagging frames on Devonshire Street, and rebuilt gate corners that were never properly gusseted in the first place. If it’s steel or iron and it belongs on a gate, we can make it right.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Northridge
When gate parts involve the operator, not just the iron, we’re certified and equipped on nine automation brands, and that includes LiftMaster, DoorKing, and Elite, the three we see most often on Northridge driveways. LiftMaster’s swing-arm operators are common on the ranch-style homes along the 1950s streets, while DoorKing and Elite show up on the larger slide gates north of Lassen Street. We stock the common replacement parts for these systems in our service vehicles, which means fewer return trips and a faster fix when your gate is stuck halfway open at the worst possible time.
Common Gate Parts & Welding Problems We See in Northridge Homes
- Post-quake footings that were never level. Northridge sits directly over the 1994 earthquake epicenter, and thousands of gate posts were re-poured in the following years, often without precise leveling. Those installations are now 25 to 30 years old and failing in concert. A hinge adjustment alone won’t hold if the post base underneath is tilted. We test the footing before we touch the hinge.
- Santa Ana wind damage on wide swing gates. The autumn winds funnel hard through the San Fernando Valley and catch big swing gates like sails. Hinges bend, posts rack, and frames twist in a pattern we can set our calendar by. If your gate leans harder every October, the fix is usually structural, not a tweak to the operator limits.
- Thermal shutoff on gate operators. Northridge regularly hits 105 to 112°F in summer, some of the highest sustained temperatures in LA County. LiftMaster and FAAC operators will trip their thermal protection and refuse to run until they cool down. The heat also breaks down grease in rack-and-pinion drive systems faster than anywhere else in LA, which means more wear on the rack and more stress on the motor.
- Rusted latches and locks on older iron gates. The combination of Valley heat, morning marine layer moisture, and decades of sprinkler overspray eats through latch mechanisms on 50s and 60s-era gates. We replace latch and lock hardware regularly, and we can fabricate a matching strike plate when the original is too far gone to save.
Pricing for Gate Parts & Welding in Northridge, CA
You want real numbers. Here they are. Hinge replacement in Northridge runs $180-$420 per hinge. Post replacement runs $600-$1,400 depending on footing depth and concrete work. Rail repair runs $220-$650. Custom welding runs $95-$150 per hour plus materials. A common full job, like pulling and re-setting a tilted post plus replacing both hinges and re-hanging the gate, typically lands between $900 and $1,800.
What changes the price? Gate weight, post depth, access to the footing, and whether the old concrete needs to be jackhammered out completely. We quote the job before any work starts. You approve the number, we do the work, and the bill matches what we agreed. No surprises. Estimates are free, and we offer a Free Second Opinion on any written estimate from another company.
Call (350) 248-1180 with a description of what your gate is doing, or not doing, and we’ll give you a straight answer.
We Also Serve Cities Near Northridge
Our crews serve the whole northwest Valley, including Winnetka, Granada Hills, Porter Ranch, and Chatsworth. If you’re a few blocks over the line, don’t worry about it. We know these streets the same way we know Northridge. Call and ask; if we can get a truck to you, we’ll tell you honestly.
Serving Northridge, CA - Our Local Coverage Area
We’re based in the Northridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Northridge
Because the problem is almost never the hinge, it’s the post underneath it. Northridge sits over the 1994 earthquake epicenter, and many gate footings were re-poured in the following years without being leveled properly. Those posts have been slowly tilting for decades, and no hinge adjustment can compensate for a footing that’s out of plumb. The fix is to test the post, pull it if needed, re-pour the base level, and then re-hang the gate. Call (350) 248-1180 and we’ll check the footing first, before we sell you anything.
Santa Ana winds funnel through the San Fernando Valley every autumn and catch wide swing gates like sails, bending hinge posts and racking the gate frame out of square. If your gate leans or drags every October, it’s wind damage. The repair is structural: straightening or replacing the post, welding the frame back square, and installing hinges that can carry the wind load. A gate that’s been wind-racked once will usually fail again unless the underlying weakness is addressed.
Yes. California follows the UL 325 safety standard, which requires automatic gate operators to have a primary entrapment protection device, typically photo eye sensors, and a secondary device like reversing edges. This applies to every automated gate in Northridge, residential or commercial. If your operator is running without working photocells, it’s not just unsafe, it’s a liability. We check safety edges and photo eyes on every operator service call and will tell you plainly if yours aren’t compliant.
The solar panel isn’t the problem, the heat is. Northridge regularly hits 105 to 112°F in summer, and gate operators like LiftMaster and FAAC will trip their thermal shutoff when ambient temperatures climb that high. The battery keeps the system powered, but the control board and motor still overheat. If your operator shuts down in the afternoon and works again after sunset, that’s thermal protection doing its job. We can relocate the control box out of direct sun, improve ventilation, or switch you to a heavy-duty operator rated for sustained Valley heat.
Yes. We fabricate farm-style gates with livestock latches for the larger properties along the northern edge of Northridge, the ones with long driveways and acreage-style lots. We build the gate to the width and weight your posts can actually carry, and we’ll tell you if the posts need to be re-set first. Custom welding is quoted per job, and the 90-Day Done Right Promise covers it like everything else we do.
Call Ironworks Gate Co. for Gate Parts & Welding in Northridge
Last month we got called out to a ranch-style home off Tampa Avenue with a 16-foot dual-swing iron gate that kept drifting out of plumb. The client had already replaced the LiftMaster operator twice. The real issue was a tilted post footing from the ’94 rebuild. Our crew pulled the post, re-poured the base, re-hung the gate with fresh hinges, and set the operator limits. Six weeks later, that gate hasn’t sagged an inch.
That’s the difference between swapping parts and fixing the actual problem. If your gate is sagging, grinding, or refusing to open, call (350) 248-1180. We’ll send a background-checked, uniformed technician to your Northridge home, diagnose the real issue, and give you a written price before any work starts. Estimates are free. We stand behind every job with the 90-Day Done Right Promise. And a live person answers the phone, 24 hours a day, 7 days a week.
Done right, and backed in writing. That’s how we work.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving the Northridge area with gate parts and welding since 1984.