Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in San Fernando, CA
A gate that won’t open, grinds instead of slides, or sags until it scrapes the driveway is more than an annoyance here in San Fernando. It’s a security gap on a 1950s lot where the fence line sits close to the street, and it only gets worse when a Santa Ana wind finds the loose latch. We repair driveway and pedestrian gates across 91340 and 91341, usually on the first visit, because we stock the hinge pins, rollers, receiver boards, and limit switches that keep failing on the region’s aging iron and tubular steel installs. Call (350) 248-1180 and a live person answers, day or night.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why San Fernando Homeowners Choose Ironworks Gate Co.
Most of our San Fernando customers have lived in the same house for twenty years or more, and they’ve been burned by a contractor at least once. They don’t need a sales pitch. They need a gate company that knows this city’s specific headaches: narrow driveways, shallow setbacks, forty-year-old posts set in concrete that was never meant to absorb opener torque. Our crews work in the Mission City and around San Fernando High School, in the Garden District and across the neighborhoods near San Fernando Road and Maclay Avenue, and they know from the first look whether a gate needs a new hinge barrel or a full re-weld. We’re led by Victor Salinas, and we back every completed job in San Fernando with the written 90-Day Done Right Promise. If it isn’t right, we return and make it right. No arguing, no paperwork, no exceptions.
We’re a dedicated gate specialist, not a handyman with a truck. We service nine gate-automation brands, including Viking, Ghost Controls, DoorKing, and Elite, so the correct fix happens on the first visit whether your opener was installed in 1998 or last year. Our technicians are background-checked and uniformed, and they work in your driveway the way they’d work in their own mother’s. And if your gate jams at 6 a.m. on a Sunday, a real person from Ironworks Gate Co. answers the phone on the second ring. Not a voicemail tree.
Gate Repair Services We Offer in San Fernando
Gate Repair
A sagging or seized gate in San Fernando is usually a structural issue, not a motor issue. We replace hinge pins and weld cracked frame joints, straighten bent rails, and re-anchor posts that have worked loose in aging concrete. We repair the gate, then we adjust it so it closes square against the post.
Learn more about our gate repair service in San Fernando.
Gate Installation
Whether you’re replacing a rusted-out pedestrian gate or adding a sliding driveway gate on a lot that’s tight to the sidewalk, we measure, order, and install to San Fernando’s own building requirements. New steel, new posts, new hardware, all fitted to the property. We do the work once, correctly, and it’s covered by our 90-Day Done Right Promise.
Learn more about gate installation in San Fernando.
Gate Motor & Opener
When a gate starts and stops, reverses halfway, or hums without moving, the opener needs a technician who knows the brand on your pad. We repair and replace motors, control boards, photo eyes, and receivers on Viking, Ghost Controls, DoorKing, Elite, and five other brands. We explain the fix before we touch a wire.
Learn more about gate motor and opener service in San Fernando.
Gate Access Control
Keypads, intercoms, request-to-exit loops, and telephone entry systems all wear down faster in San Fernando’s summer heat than the manufacturer’s lifespan charts suggest. We install and repair Gate Access Control - San Fernando systems that survive a Valley August, and we show you how to use yours without needing a call every six months.
Call (350) 248-1180 to schedule access control service on your San Fernando property.
Gate Parts & Welding
We handle our Gate Parts & Welding in San Fernando, fabricating custom brackets, hinge plates, and frame patches on-site when a gate’s dimensions or a post’s setback don’t match any off-the-shelf part. For San Fernando’s older retrofit gates, a custom repair is often the only repair that lasts. We bring the welder, the steel, and the eye of a blacksmith.
Call (350) 248-1180 if your gate needs metalwork, not just a motor swap.
Neighborhoods We Serve in San Fernando
We cover all of San Fernando, including 91340 and 91341, plus nearby Granada Hills, CA. Most repair calls in this area get a same-day or next-day visit, because our crews know the grid from Hubbard Street to Foothill Boulevard and we don’t spend the drive getting lost.
- The Mission City core near San Fernando Road and Maclay Avenue
- The Garden District, including the blocks around San Fernando High School
- Areas east of Truman Street, near the Pacoima border
- The residential streets around Cesar Chavez Learning Academies
- Neighborhoods south of Paxton Street, toward the 5 freeway
We know these streets well enough to tell you over the phone whether the fix is likely a hinge or a receiver board, before the truck even rolls. That’s the difference between a company that works in San Fernando and a company that just drives through it.
Why San Fernando’s Climate & Housing Affect Gate Repair
San Fernando sits on the inland Valley floor, where summer highs regularly clear 100°F. That heat bakes gate hardware in ways coastal neighborhoods never see: iron oxidizes faster, powder coat cracks along weld seams, and aluminum slide tracks warp just enough to make a gate bind at the end of its travel. Then come the Santa Anas. Every fall, wind funnels through the San Fernando Pass and slams into gates left unlatched or held by a tired closer. We see bent top rails, snapped hinge welds, and openers that burned out fighting the wind. These aren’t one-off failures. They’re the predictable result of San Fernando’s climate meeting 30-year-old metal.
The housing stock compounds it. Most homes in 91340 and 91341 are compact postwar builds from the 1940s, 50s, and 60s, on lots where a driveway gate wasn’t built with the house. It was bolted on later, often by a well-meaning welder who set posts in concrete footings never engineered for the torque of an automated opener. We regularly see posts that have cracked their own footings, and gates whose motors are doing the work the structure should have done. That’s why our repairs start with the hinges and the post anchors, not just the opener. Fix the structure first, then the motor lasts.
Pricing for Gate Repair in San Fernando
We quote a firm price before any work begins, and we write it down. The number we quote is the number on the invoice. Here’s what San Fernando homeowners typically see:
- Hinge replacement or weld repair: $180 - $420
- Opener receiver board or limit switch replacement: $220 - $380
- Full motor replacement (parts included): $650 - $1,400 depending on brand and horsepower
- Slide gate track straightening or replacement: $300 - $700
- Post re-anchoring with new concrete: $350 - $900 depending on footing size
- Seasonal tune-up (adjustment, lubrication, safety check): $89
We also honor our standing offers in San Fernando: $50 off any repair over $250, a free second opinion on any written estimate you’ve received, and a permanent 5% discount for seniors and veterans. Call (350) 248-1180 for an exact price. Estimates are free, and no work starts until you approve the number.
Service Area - Cities Near San Fernando
If you’re just outside San Fernando, we also serve Sylmar gate repair, Granada Hills gate repair, Northridge gate repair, and Porter Ranch gate repair. Our Los Angeles office dispatches local crews to all of them.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Fernando
Most gate repairs in San Fernando run between $180 and $450 for structural work like hinges, welds, and brackets, and between $220 and $1,400 when an opener motor or control board is involved. You’ll get a written, upfront price before any work starts, and the number we quote is the number you pay. Get a free estimate by calling (350) 248-1180.
In most cases, yes. We keep common hinge pins, rollers, remotes, receiver boards, and limit switches on our trucks, and our San Fernando routes are set up for same-day response on the majority of repair calls. Call (350) 248-1180 in the morning and we’ll tell you honestly what our schedule looks like that day.
Yes. San Fernando is an independent municipality, completely surrounded by the City of Los Angeles, and it runs its own Building & Safety Department. If a new automated gate or a major opener change requires a permit, you’re dealing with San Fernando’s inspectors and fee schedule, not LA City’s. We know that process and we handle the paperwork for you. It’s a common tripwire for contractors who work our Sylmar service area or Pacoima and assume it’s all one system.
Because the wind that funnels through the San Fernando Pass hits gates with more force than most latches are built to hold, especially on older gates with worn striker plates. But a gate that blows open repeatedly usually points to a magnetic lock that isn’t holding, a broken closer arm, or a latch that’s no longer catching. We diagnose and fix the specific weak point, not just the symptom. Call (350) 248-1180 for a free estimate.
A full installation includes measuring the driveway and setback, recommending the right gate and opener for your property, ordering the steel, pulling any required San Fernando permits, setting posts in properly engineered concrete, hanging the gate, installing and programming the opener, and testing safety edges. The price is written and agreed before we order anything. Learn more about gate installation in San Fernando.
Written by Victor Salinas, Owner at Ironworks Gate Co.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Fernando Customers Say
"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett