Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Fast, Reliable Gate Installation Across Granada Hills
Gate installation in Granada Hills costs $1,850-$7,400 for a complete driveway system, and $850-$2,200 for a pedestrian gate, including posts, hardware, and basic automation. We run crews into Granada Hills every weekday and most Saturdays, typically reaching homes between Balboa Boulevard and Zelzah Avenue within one to two days of your call. If you’re on a horse property above Rinaldi Street or dealing with a cracked post footing from the ’94 quake, the job still gets an honest written price before any work starts. Call (350) 248-1180 and speak with a live person, any hour, any day.
Key takeaways:
- A typical driveway gate in Granada Hills runs $1,850-$7,400 installed, with automation included.
- We check post plumb on every Granada Hills job because the 1994 Northridge quake cracked and tilted footings all over this neighborhood.
- Sliding gates are often the only option on the shared driveways common in the older ranch-style tracts.
- Every install is quoted upfront, in writing, and backed by our 90-Day Done Right Promise.
Why Ironworks Gate Co. Is Granada Hills’s Preferred Gate Installation Company
Homeowners in Granada Hills have been calling Ironworks Gate Co. since the 1980s, and the calls keep coming because we do the work the neighborhood’s older homes actually need. We know that a 1960s ranch on a wide lot off Hayvenhurst Avenue has different gate problems than a hillside property above Rinaldi. Our technicians have walked these driveways for decades. Gate Installation is all we do, all day, and that focus shows when we set a post, hang a 500-pound steel gate, and wire the operator without needing to call in a third trade.
Victor Salinas, who runs our crews, has seen every way a Granada Hills gate can fail. A post leaning 3 degrees from a shifted footing. A gearbox ground down by a horse-trailer gate that’s too heavy for its operator. A set of hinges loosened by three straight seasons of Santa Ana gusts. He trains every technician to look for these local conditions before recommending a fix. When you call, a real person answers. When we schedule, we show up. When the job is done, you get it in writing that it’s done right.
Granada Hills homeowners tell us the same thing: they’ve been burned by generalists who installed a gate that sagged inside two years. We hear it on Zelzah, on Gothic Avenue, on Bull Creek Road. The difference is we stand behind the work with a written 90-Day Done Right Promise, no fine print, no arguing.
Our Gate Installation Services in Granada Hills
Driveway Gate Installation
A driveway gate in Granada Hills has to handle more than most LA neighborhoods. Long concrete driveways on 1950s and 1960s ranch lots mean gates that cover 12 to 20 feet of opening, and many northern foothill properties need something wide enough for a horse trailer. We install steel and aluminum driveway gates rated for that load, with operators sized to match, not underpowered residential units that grind themselves to death in a year.

Pedestrian Gate Installation
For the side yards and walkways that run alongside Granada Hills homes, we install pedestrian gates from $850-$2,200, matching the height and finish of an existing driveway gate. These smaller gates often get a keypad or intercom so delivery drivers and kids can get through without opening the big gate. Post footings get the same plumb check every time.

Sliding Gate Installation
The shared driveways and tight setbacks all over Granada Hills, especially in the older tracts near Balboa and San Fernando Mission Boulevard, often leave no swing room. A sliding gate needs a longer post run and a rack-and-pinion or chain drive, but it saves the driveway space a swing gate would eat. We install slide gates on cantilever and V-track systems, and we size the track and rollers for gates that will cycle hundreds of times a week.

Swing Gate Installation
Swing gates remain the most common choice for single-family Granada Hills homes with room to spare, but the local soil and quake history demand better footings than a box-store install provides. We set posts in concrete piers deep enough to resist both soil movement and the lateral pull of the gate, then recheck plumb with a level before hanging. A post 3 or 4 degrees out of plumb will overload any operator and void most warranties, and we see it regularly here.

Double Gate Installation
Double gates, or pairs of leaves that meet in the middle, cover the widest openings on Granada Hills equestrian properties. A 16-to-20-foot double gate requires two operators or a matched pair sized for synchronized operation. Santa Ana winds through the passes above town apply lateral force that loosens hinge bolts and knocks misaligned leaves off their stops, so we torque everything to spec and add reinforcement at the stress points.

Security Gate Installation
Some Granada Hills homeowners want more than a driveway gate; they want a true security barrier with access control. We install steel security gates with maglocks, keypads, and vehicle loop detectors, wired so the pedestrian gate and vehicle gate can be controlled separately. On the northern tier near the foothills, where properties sit further from the street and response times are longer, security gates get heavier frames and tamper-resistant hardware.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Granada Hills
We install and service operators from Viking, DoorKing, Ghost Controls, and Elite, among others. That means when a Granada Hills customer needs a part or a replacement operator, we can often pull it from stock and finish the job same trip instead of ordering and coming back. Our technicians are trained on nine major automation brands, so the operator on your existing gate doesn’t dictate who can work on it. We match the new install to the gate’s weight, cycle rate, and exposure, not to whatever’s cheapest on the truck that day.
Common Gate Installation Problems We See in Granada Hills Homes
- Post footings cracked in the 1994 Northridge quake. We check plumb on every Granada Hills install before mounting a new operator. A post leaning even 3 degrees from a shifted footing will drag a swing gate, bind the latch, and burn out a motor that was perfectly fine.
- Shared driveways with no swing room. Many older Granada Hills tracts have shared rights of way that leave no space for a swinging leaf. Slide gates solve the clearance problem but need longer post runs and accurate rack-and-pinion adjustment from day one.
- Santa Ana wind loosening hinge bolts. Newly installed double gates on the northern foothills get hit with lateral gusts every fall. We torque hinge hardware to spec and add reinforcement so the gate stays aligned through the wind season.
- Summer heat tripping operator thermals. Inland Granada Hills regularly hits 100-110°F, and unshaded operators on south-facing driveways trip thermal cutoffs. We mount operators with airflow in mind and size them so they’re not running at their thermal limit on a July afternoon.
- Horse-trailer loads on residential hardware. A 16-to-20-foot steel gate on a Rinaldi-area horse property is far heavier than any standard residential operator is rated for. We spec commercial-grade operators, heavy-duty hinges, and loop detectors that keep the gate open long enough for a full trailer to clear.
Pricing for Gate Installation in Granada Hills, CA
A typical driveway gate install in Granada Hills runs $1,850-$7,400 depending on gate width, material, and operator. Pedestrian gates run $850-$2,200. Double gates and slide gates land on the upper end because they require more post work and heavier operators. Security gates with access control typically run $3,500-$9,500. We give you a written price before any work starts, and that price doesn’t move unless you change the scope. Call (350) 248-1180 for a free estimate. A person answers, and they can usually get someone out to Granada Hills within a day or two.
| Service | Typical Granada Hills Price Range |
|---|---|
| Pedestrian gate (steel or aluminum) | $850-$2,200 |
| Single driveway swing gate | $1,850-$4,200 |
| Sliding gate (with track and rack) | $2,800-$6,500 |
| Double gate (16-20 ft, equestrian-rated) | $4,500-$7,400 |
| Security gate with access control | $3,500-$9,500 |
We Also Serve Cities Near Granada Hills
Our Granada Hills crews also cover Northridge, Porter Ranch, San Fernando, and Sylmar. If your property sits near the Granada Hills city line, or you have family in one of the neighboring communities who needs gate work, the same crew can handle it. Scheduling is coordinated from our Los Angeles office, and the Granada Hills technicians know these surrounding streets just as well.
Serving Granada Hills, CA - Our Local Coverage Area
We’re based in the Granada Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Granada Hills
Because the 1994 Northridge earthquake cracked and shifted concrete footings all across Granada Hills, and those fractures don’t always show at the surface. A post can sit straight for a decade, then slowly tilt as soil moves through wet winters and dry summers. We check every post with a level before installing a new operator, and if it’s out of plumb we don’t mount anything until the footing is repaired. Call (350) 248-1180 and we’ll come measure yours.
Sometimes, but many shared driveways in Granada Hills don’t have the set-back room for a swinging leaf, and a swing gate crossing a shared right of way creates liability between neighbors. Slide gates usually work better, sliding along the property line and staying within the owner’s side. We’ll look at your driveway and tell you straight what fits.
For a 16-to-20-foot steel or heavy wooden gate carrying horse-trailer traffic above Rinaldi Street, you need a commercial-grade operator rated for at least 1,200-1,500 lbs and a high duty cycle, not a standard residential opener. Viking, DoorKing, and FAAC make units that hold up, but they have to be specified and installed for the actual gate weight. We size and spec them daily on Granada Hills horse properties.
Santa Ana gusts funnel through the passes and hit Granada Hills properties hard enough to loosen hinge bolts and knock a double gate off its stops within a season if the hardware wasn’t torqued right and reinforced at the stress points. We torque everything to specification, add reinforcement, and check the gate’s alignment after the first big wind event as part of our follow-up.
Yes. Inland Granada Hills regularly hits 100-110°F in summer, and an unshaded operator on a south-facing driveway will trip its thermal cutoff over and over if it’s already running near its capacity. We mount operators where air can circulate, and we size them so a July afternoon doesn’t shut your gate down. Call (350) 248-1180 for an exact recommendation on your property.
The 1994 Quake Still Affects Gate Work in Granada Hills
This is something a generic gate installation page will never tell you. Granada Hills sits just north of the Northridge earthquake epicenter, and three decades later, technicians still find post footings with hairline fractures that let a post tilt a few degrees over the years. That tilt causes swing-gate drag, latch misalignment, and operator strain that looks like a motor problem but isn’t. On a long 1960s ranch driveway off Rinaldi Street, our crew replaced a 40-year-old swing gate whose hinge post had tilted after the quake. We saw the post leaning 4 degrees, so we poured a new footing, installed a heavier-duty FAAC operator rated for the wide horse-trailer gate, and added a fresh loop detector so the gate wouldn’t close on a trailer. That’s the difference between a gate that works for two years and one that works for twenty.
Call Ironworks Gate Co. for Gate Installation in Granada Hills
If your Granada Hills property needs a new driveway gate, pedestrian gate, slider, double gate, or a full security system, call (350) 248-1180. We’ll schedule a free measure, give you a written price on the spot, and do the work with a crew that knows this neighborhood’s soil, wind, heat, and quake history. The price is agreed before any work starts. The job is guaranteed in writing for 90 days. Victor Salinas and the Ironworks Gate Co. team have been doing this long enough to know that in Granada Hills, a gate has to be more than good-looking. It has to be done right.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Granada Hills, CA.
Before
After
Before
After
Before
After